New scripts for buses. 2.0
Planetary doors.
The script does work Planetary doors. There is a corresponding sound.
Management:
Num-+ Num0-open/close all doors
Num-+ Num1-open/close the front door
Num-+ Num2-open/close the Middle door
Num-+ Num3-open/close the back door
Num-+ Num4-open/close the front and Central doors
+ Num-Num5-open/close middle and rear doors
Num-+ Num6-open/close the front and rear doors
Num-+ Num9-open/close the door to the cabin
+ Num-Num *-open/close the door to the Salon
+ Num-Num-open/close all the doors, without the sash in the cab
Janitors.
The script does work janitors. There is a corresponding sound.
Management:
Num/+ Num7-first mode enabled
Num/+ Num8-insert the second mode
Num/+ Num9 third mode-enable
Num/+ Num0-turn off wipers
Hatches.
The script allows you to open and close the hatches on the roof *.
Management:
Num/+ Num1-lift the front hatch
Num/+ Num2-lift the average hatch
Num/+ Num3-lift the rear hatch
Num/+ Num4-raise the front hatch
Num/+ Num5-raise the average hatch
Num/+ Num6-lift the rear hatch
Turn Signals.
The script does work signals cornering and "fault signaling. There is a corresponding sound.
Management:
Z-enable/disable left pan/tilt
(C)-enable/disable the right pan/tilt
X-on/off switch on hazard lights "
Reverse signal.
The script makes a reverse signal.
Works automatically when driving the bus in reverse.
Light in the cabin
The interior lighting.
Management:
L-switch on/off the lights in the cabin
EMU
Change of routes on the electronic Shuttle index (EMU).
Management:
Shift + n-opens a menu to select the route
Author | kenking |
CLEO version | CLEO 4 |