Active dashboard v3.2 Full

This mod is intended to revive some of the components of cars that have been fixed.

New features:
- quickens gauges (speedometer, tachometer (now arrow moves smoother), gas);
enlivens the wheel;
- working wipers;
- working turn signals and back up (there are sources of light, and the light falls on a nearby cars and people),
including on trailers;
- fully working constant velocity joints (there is a possibility of synchronization with both front and rear wheels), with lively suspension
change the angle of the crossbar;
- brake caliper (rotate with the wheel, but, as expected, did not mix);
- working tie rods;
- fans engine (speed depends on oborot engine), you can create 2 fans. instead of the second
fan, you can do the crankshaft pulley for example;
- turning intersectional disk, as in "Ikarus" with accordion;
- a steering wheel in the rear section of the "Icarus";
- you can create ahead of another bridge with a steering wheels;
- you can create back thruster axle, as on some buses, angles are calculated on the basis of size model;
- the ability to create a dump trucks with fully working hydraulics, including and on trailers;
- smooth rotation of the wheels on cars of a class "worker";
- customize cars (calibrate speedometer, tachometer pointer fuel, stroke and janitorial
the turning of the steering wheel;
- management of the transfer case (only on all-wheel drive vehicles);
- you can raise the cab truck type "KAMAZ".

Update 3.1:
- fully function pointers oil pressure, engine temperature, the mileage (kilometres who believes) and mechanical watches;
- deformed springs;
- cars-class worker with a diesel engine when the engine is running and high rpm black smoke;
- correct working trailers with swing frame;
- ability to attach a trailer to any cars;
- creation of tractors, bendable to rotate in half.

Update 3.2 beta:
- working ammeter and voltmeter;
- beta version of the electronic odometer;
- the possibility of creation on motorcycles arrow speedometer, tachometer, and gasoline;
- the configuration file of the keys management;
- additional settings for springs;
- fixed some nasty bugs.

Update 3.2 FULL:
- made minor changes to the previously existing algorithms;
- for trailers added additional axis.

Control (default):
- "K" - wipers;
J - switch off the engine;
- "B" - hammer (pressed once, and he kept squeezing. pressing removed);
- P - hook/to unhook the trailer (the machine must be in touch with trailer);
- "Z" - the left signal lamp on/off;
- X - hazard lights on/off;
- "C" right turn signal on/off;
- "9" - reduced (on/off at a speed less than 5 km/h);
"0" is the front-wheel drive;
- "-" - wheel drive;
- "=" - rear-wheel drive;
"num8" standing near the machine to lift the cabin;
"num2" - to lower a cab standing next to the car;
"num8"/"num2" - raise/lower body (driving need to sit). the dump truck is possible to do any car. if the truck - dumper,
then using a hydraulic lift to lower the body num7/num1.

The Management Of The Crane:
- "num8"/"num2" - raise/lower the boom;
- "num4"/"num6" is to spin the arrow;
- "num7"/"num9" - pull/push an arrow;
- "num1"/"num3" - release/remove support;
- "num+"/"num1" - to uncoil/unwinding cross.